Edge-Core ECS4110-28T Management Manual page 1318

| Multicast Filtering Commands
C 40
HAPTER
MVR for IPv6
show mvr6
members
Table 184: show mvr6 interface - display description (Continued)
Field Description
Immediate Shows if immediate leave is enabled or disabled.
Static Group Address Shows any static MVR group assigned to an interface, and the receiver
VLAN.
This command shows information about the current number of entries in
the forwarding database, or detailed information about a specific multicast
address.
S
YNTAX
show mvr6 [domain domain-id] members [ip-address]
domain-id - An independent multicast domain. (Range: 1-5)
ip-address - IPv6 address for an MVR multicast group.
D S
EFAULT ETTING
Displays configuration settings for all domains and all forwarding entries.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
The following shows information about the number of multicast forwarding
entries currently active in domain 1:
Console#show mvr6 domain 1 members
MVR6 Domain : 1
MVR6 Forwarding Entry Count :1
Flag: S - Source port, R - Receiver port.
H - Host counts (number of hosts join the group on this port).
P - Port counts (number of forwarding ports).
Up time: Group elapsed time (d:h:m:s).
Expire : Group remaining time (m:s).
Group Address
------------------------------ ---- ----------- ----------- ------ --------
ff05::101
Console#
– 1318 –
VLAN Port Up time
2 00:00:00:19
2 Eth1/ 2(S)
1 Eth1/ 4(R)
Expire Count
2(P)
0(H)