Edge-Core ECS4110-28T Management Manual page 466

| Basic Administration Protocols
C 14
HAPTER
Simple Network Management Protocol
S C
ETTING OMMUNITY
A S
CCESS TRINGS
Use the Administration > SNMP (Configure User - Add Community) page to
configure up to five community strings authorized for management access
by clients using SNMP v1 and v2c. For security reasons, you should
consider removing the default strings.
CLI R
EFERENCES
"snmp-server community" on page 795
◆
P
ARAMETERS
These parameters are displayed:
Community String – A community string that acts like a password
◆
and permits access to the SNMP protocol.
Range: 1-32 characters, case sensitive
Default strings: "public" (Read-Only), "private" (Read/Write)
Access Mode – Specifies the access rights for the community string:
◆
Read-Only – Authorized management stations are only able to
■
retrieve MIB objects.
Read/Write – Authorized management stations are able to both
■
retrieve and modify MIB objects.
W I
EB NTERFACE
To set a community access string:
Click Administration, SNMP.
1.
Select Configure User from the Step list.
2.
Select Add Community from the Action list.
3.
Add new community strings as required, and select the corresponding
4.
access rights from the Access Mode list.
Click Apply
5.
Figure 256: Setting Community Access Strings
– 466 –