loopback-detection
release
show loopback-
detection
C
M
OMMAND
ODE
Global Configuration
C
U
OMMAND
SAGE
Refer to the
loopback-detection recover-time
conditions which constitute loopback recovery.
E
XAMPLE
Console(config)#loopback-detection trap both
Console(config)#
This command releases all interfaces currently shut down by the loopback
detection feature.
S
YNTAX
loopback-detection release
C
M
OMMAND
ODE
Privileged Exec
E
XAMPLE
Console#loopback-detection release
Console(config)#
This command shows loopback detection configuration settings for the
switch or for a specified interface.
S
YNTAX
show loopback-detection [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
C
M
OMMAND
ODE
Privileged Exec
E
XAMPLE
Console#show loopback-detection
Loopback Detection Global Information
Global Status
: Enabled
Transmit Interval : 10
Recover Time
: 60
Action
: Shutdown
– 1077 –
| Loopback Detection Commands
C
32
HAPTER
command for information on