Edge-Core ECS4110-28T Management Manual page 1405

This command specifies the address of one or more domain name servers
ip name-server
to use for name-to-address resolution. Use the no form to remove a name
server from this list.
S
YNTAX
[no] ip name-server server-address1 [server-address2 ...
D
EFAULT
None
C
OMMAND
Global Configuration
C
OMMAND
The listed name servers are queried in the specified sequence until a
response is received, or the end of the list is reached with no response.
E
XAMPLE
This example adds two domain-name servers to the list and then displays
the list.
Console(config)#ip name-server 192.168.1.55 10.1.0.55
Console(config)#end
Console#show dns
Domain Lookup Status:
Default Domain Name:
Domain Name List:
Name Server List:
Console#
R
ELATED
ip domain-name (1403)
ip domain-lookup (1402)
server-address6]
server-address1 - IPv4 or IPv6 address of domain-name server.
server-address2 ... server-address6 - IPv4 or IPv6 address of
additional domain-name servers.
S
ETTING
M
ODE
U
SAGE
DNS disabled
sample.com
sample.com.jp
sample.com.uk
192.168.1.55
10.1.0.55
C
OMMANDS
– 1405 –
| Domain Name Service Commands
C 44
HAPTER