Analog Input - INVT Goodrive 300 Operation Manual

inverters
Goodrive300
Function
code
P17.14

7.9 Analog input

Goodrive300 series inverters have three analog input terminals and 1 high-speed pulse input
terminals (of which, AI1 and AI2 are 0~10V/0~20mA and Al can select voltage input or current input
by J1, A2 can select voltage input or current input by J2 and AI3 is for -10~10V ) as the standard
configuration. The inputs can be filtered and the maximum and minimum values can be adjusted.
0
1
P05.00
HDI input type selection
0: HDI is high speed pulse input
P05.00
1: HDI is switch input
Relative parameters list:
Name
Digital adjustment
AI1
AI2
AI3
0
HDI 1
2
P05.49
HDI high speed pulse input function selection
0: frequency setting input
P05.49 1: counter input
2: length counter input
Detailed instruction of parameters
Display the adjustment through the
keypad of the inverter.
Range : 0.00Hz~P00.03
AI1 input voltage
Analog curve input setting
P17.15
P05.32
P05.33
P05.34
AI2 input voltage
P05.35
P17.16
P05.37
P05.38
P05.39
P05.40
AI3 input voltage
P17.17
P05.42
P05.43
P05.44
P05.45
P05.46
AI3
P05.47
HDI input frequency
P17.18
P05.50
P05.51
P05.52
P05.53
178
Basic operation instruction
Analog input filter
P05.36
P05.41
P05.48
AI1/AI2/HDI
P05.54
Default
value
0.00V