INVT Goodrive 300 Operation Manual page 93

inverters
Goodrive300
Functio
Name
n code
QUICK/JOG
P07.02 function
selection
Detailed instruction of parameters
address(including the motor parameters)
3:Download the keypad function parameter to local
address (excluding the motor parameter of P02, P12
group)
4:Download the keypad function parameters to local
address (only for the motor parameter of P02,P12
group)
Note: After completing the 1~4 operations, the
parameter will come back to 0 automatically; the
function of upload and download excludes the
factory parameters of P29.
0:No function
1: Jogging running. Press QUICK/JOG to realize the
jogging running.
2: Shift the display state by the shifting key. Press
QUICK/JOGto shift the displayed function code from
right to left.
3: Shift between forward rotations and reverse
rotations. Press QUICK/JOG to shift the direction of
the frequency commands. This function is only valid
in the keypad commands channels.
4: Clear UP/DOWN settings. Press QUICK/JOG to
clear the set value of UP/DOWN.
5: Coast to stop. Press QUICK/JOG to coast to stop.
6: Shift the given manner of running commands.
Press QUICK/JOG to shift the given manner of
running commands.
7:Quick commission mode(committee according to
the non-factory parameter)
Note: Press QUICK/JOGto shift between forward
rotation and reverse rotation, the inverter does not
remember the state after shifting during powering off.
92
Function codes
Default Modif
value y
◎
1