INVT Goodrive 300 Operation Manual page 92

inverters
Goodrive300
Functio
Name
n code
HDO output
Correspondi
ng HDO
P06.30
output to the
upper limit
HDO output
P06.31
filter time
P07 Group Human-Machine Interface
User's
P07.00
password
Parameter
P07.01
copy
Detailed instruction of parameters
0~65535
The password protection will be valid when setting
any non-zero number.
00000: Clear the previous user's password, and
make the password protection invalid.
After the set user's password becomes valid, if the
password is incorrect, users cannot enter the
parameter menu. Only correct password can make
the user check or modify the parameters. Please
remember all users' passwords.
Retreat editing state of the function codes and the
password protection will become valid in minute. If
the valid password is available, press PRG/ESCto
enter into the editing state of the function codes, and
then "0.0.0.0.0" will be displayed. Unless input right
password, the operator can not enter into it.
Note: restoring to the default value can clear the
password, please use it with caution.
The function code determines the manner of
parameters copy.
0:No operation
1:Upload the local function parameter to the keypad
2:Download the keypad function parameter to local
91
Function codes
Default Modif
value y
50.00k
○
Hz
○
0.000s
○
0
◎
0