State Word (Sw) - INVT Goodrive 300 Operation Manual

inverters
Goodrive300
nd
From 2 word to 12
value is offered by main setting signal source. As PWM rectifier feedback part doesn't have
main frequency setting part, corresponding settings belong to reserved part, the following
table shows inverter part settings for Goodrive300.
Bit
PZD2 0:Invalid
receiving 1:Set frequency(0~Fmax(unit:0.01Hz))
2:Given
PZD3
100.0%)
receiving
3:PID feedback, range(0~1000,1000 corresponds to
PZD4
100.0%)
receiving
4:Torque set value(-3000~3000,1000 corresponds to
PZD5
100.0% the rated current of the motor)
receiving
5:Set
PZD6
frequency(0~Fmax unit:0.01Hz))
receiving
6:Set value of the reversed
PZD7
frequency(0~Fmax(unit:0.01Hz))
receiving
7:Electromotion
PZD8
corresponds to 100.0%of the rated current of the motor)
receiving
8:Braking torque upper limit (0~2000,1000 corresponds
PZD9
to 100.0% of the rated current of the motor)
receiving
9:Virtual input terminals command
PZD10
Range:0x000~0x1FF
receiving
10:Virtual output terminals command
PZD11
Range:0x00~0x0F
receiving
11:Voltage
separation )(0~1000,1000 corresponds to 100.0% the
rated voltage of the motor)
PZD12
12:AO output set value 1(-1000~1000,1000 corresponds
receiving
to 100.0%)
13:AO output set value 1(-1000~1000,1000 corresponds
to 100.0%)

State word (SW):

The first word of PZD response message is state word (SW) of inverter, the definition of state
th
of PZD task message is the main set value REF, main frequency set
Name
PID, range(0~1000,1000
value of the forward
torque
setting value(specialized
corresponds
rotation upper-limit
rotation upper-limit
upper limit (0~3000,1000
for
265
Appendix A
Function selection
0
to
0
0
0
0
0
0
0
0
0
V/F
0