Figure 2-15 "Edit Offset" Display With Data Added - Keysight N1911A User Manual

General Power Meter Functions 2
Editing frequency dependent offset tables requires the following steps:
1 Identify and select the table you want to edit
2 Rename the table
3 Enter the frequency and offset pairs
4 Save the table
Procedure
First select the table you want to edit as follows:
A frequency in the range of 0.001 MHz to 1000.0 GHz can be entered. A
NOTE
calibration factor in the range of 1% to 150% can be entered.
1 Press , Tables , to display the Offset Tbls screen.
Freq. Dep. Offset
2 Choose the table you want to edit using the and keys. Press
Ed it Table
to display the Ed it Offset screen as shown in Figure 2-15.
Figure 2-15 "Edit Offset" display with data added
Keysight N1911A/1912A User's Guide 75