MT-20
MANUAL TRANSMISSION (HARDTOP & CANVAS TOP) - OUTPUT SHAFT
(b)
Using a brass bar and hammer, drive in the snap ring.
4.
INSPECT FIFTH GEAR THRUST CLEARANCE
Using a feeler gauge, measure the fifth gear thrust clear-
ance.
Standard clearance:
0.1 - 0.35 mm (0.0039 - 0.0138 in.)
5.
INSTALL THIRD GEAR AND HUB SLEEVE NO.2 ASSEM-
BLY
(a)
Apply gear oil to the shaft and needle roller bearing.
(b)
Place the synchronizer ring on the gear and align the ring
slots with the shifting keys.
(c)
Install the needle roller bearing in the third gear.
(d)
Using SST and a press, install the third gear and hub
sleeve No.2.
SST 09316-60010 (09316-00010)
6.
INSTALL SNAP RING
(a)
Select a snap ring that will allow minimum axial play.