Table of Contents
Advertisement
SECTION
SPECIFICATIONS
3.1
INTRODUCTION
The DSP56367 is a high density CMOS device with Transistor-Transistor Logic (TTL)
compatible inputs and outputs.
Note:
This document contains information on a new product.
Specifications and information herein are subject to change without notice.
Finalized specifications may be published after further characterization and device
qualifications are completed.
3.2
MAXIMUM RATINGS
Note:
In the calculation of timing requirements, adding a maximum value of one
specification to a minimum value of another specification does not yield a
reasonable sum. A maximum specification is calculated using a worst case
variation of process parameter values in one direction. The minimum specification
MOTOROLA
3
CAUTION
This device contains circuitry protecting
against damage due to high static voltage
or electrical fields. However, normal
precautions should be taken to avoid
exceeding
maximum
Reliability of operation is enhanced if
unused
inputs
appropriate logic voltage level (e.g., either
GND or V
). The suggested value for a
CC
pullup or pulldown resistor is 10 kΩ.
DSP56367
voltage
ratings.
are
pulled
to
an
3-1
Advertisement
Table of Contents
