Expansion cards and backup units
▶ If applicable, connect the FBU adapter cable.
For the cable plan, see
Concluding steps
▶
"Reassembling" on page
▶ If applicable, connect all external cables to the expansion card(s).
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Updating expansion card firmware" on page
▶ If applicable,
"Enabling Option ROM scan" on page
▶
"Resuming BitLocker functionality" on page
9.5.2
Removing an expansion card
Upgrade and Repair Unit
(URU)
Tools:
– Phillips PH2 / (+) No. 2 screw driver
– Hexagon screw driver 5 mm (not valid for Japan)
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶ Remove all external cables from the expansion card to be removed.
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
236
"Appendix B" on page
51.
56.
57.
45.
Upgrade and Maintenance Manual
463.
74.
88.
Hardware: 5 minutes
65.
46.
47.
73.
RX2520 M5