Rear End Door Lock Assembly Components
1. Rear end door latch assembly
(rear end door switch is built in this assembly)
2. Rear end door opener switch
3. Latch striker
Rear End Door Lock Assembly Removal and
Installation
Removal
1) Remove door trim (1) from rear end door panel (2).
2
"B"
1
1
6
(b)
3
4
4. Shim
5. Door handle
6. Emergency lever
: Rear end door is unlocked by pushing emergency lever
with flat head driver if rear end door lock can not be
released by door opener switch.
S7RS0B9606011
"A"
"A"
"A"
"A"
"A"
"A"
"A"
"A"
"B"
"A"
"B"
I4RS0A960016-01
7
(a)
2) Disconnect door lock motor lead wire.
3) Loosen door latch bolts (1) and remove door latch
assembly (2).
2
Security and Locks:
9F-11
S7RS0B9606010
2
5
I4RS0B960009-01
7. Rear end door request switch
(if equipped)
: 10 N⋅m (1.0 kgf-m, 7.5 lb-ft)
: 23 N⋅m (2.3 kgf-m, 17.0 lb-ft)
1
I4RS0A960017-01