Front Door Window Regulator Removal And Installation - Suzuki Swift Sport 2004 Service & Repair Manual

9E-9 Glass / Windows / Mirrors:
4) Remove door trim bracket (1).
5) Remove door sealing cover (2).
1
2
6) Remove door glass mounting screws (1).
7) Remove door glass (2) while tilting it as shown.
1
Installation
Reverse removal procedure noting the following
instructions.
• If there is deformity for glass run, replace it with a new
one.
• Tighten door glass rear mounting screw (1) first, and
then tighten door glass front mounting screw (2).
2
I4RS0A950008-01
2
I4RS0A950009-01
1
I4RS0A950010-01
• Secure door sealing cover (1) with adhesive (2).
1
2
• Install front door trim.
Front door trim attaching order
(1) → (2) → (3) → (4) → (5) → (6)
"A"
1
6
"A"
"A"
"A"
5
4
Front Door Window Regulator Removal and
Installation
Removal
1) Remove door glass referring to "Front Door Glass
Removal and Installation".
2) Disconnect power window motor lead wire at
coupler.
3) Remove regulator mounting screws (1), and then
remove front door window regulator (2).
1
I4RS0A950011-01
2
"A"
"A"
3
"A"
I4RS0A950012-01
S7RS0B9506004
2
1
I4RS0A950013-01