Installation
Reverse removal procedure noting the following
instruction.
• Apply grease to sliding portions of window regulator.
: Grease 99000–25011 (SUZUKI Super Grease A)
• Tighten front door window regulator attaching screws.
Front door window regulator screw tightening
order
(a) → (b)
Rear Door Window Components
9
1. Door glass
2. Window regulator assembly
: Apply lithium grease 99000-25011 to
sliding part.
3. Glass run
4. Door trim
5. Door sealing cover
Front Door Window Regulator Inspection
Check the following parts for wear, damage, smooth
operation and lubrication:
• Check regulator sliding and rotating parts.
• Check rollers.
7
3
6. Door sash
7. Door panel
8. Rear door window regulator mounting screw
: Tighten lower screw first, and then tighten upper screw.
9. Rear door outer weather-strip
10. Rear door partition glass.
Glass / Windows / Mirrors:
(b)
10
6
11
b
11. Rear door inner garnish
12. Door trim bracket
a: Sash upper mounting screw
: Tightening order: a → b → c
b, c: Sash lower mounting bolt
: Tightening order: a → b → c
9E-10
(a)
I4RS0A950014-01
S7RS0B9506005
S7RS0B9506006
1
I4RS0A950015-01