9F-6 Security and Locks:
Front Door Lock Assembly Components
5
1. Front door latch assembly
: Apply lithium grease 99000-25010 to sliding and rotating parts and spring if any.
2. Outside handle assembly
: Apply lithium grease 99000-25010 to sliding part.
3. Outside handle frame
: Apply lithium grease 99000-25010 to sliding part and spring.
Front Door Lock Assembly Removal and
Installation
Removal
1) Remove door mirror trim (1).
2) Remove door trim (3) after removing screws (2) and
clips "A" and "B".
1
"B"
"A"
"A"
"A"
"A"
2
3) Disconnect power window switch and mirror switch
lead wire at coupler.
4) Remove door trim bracket (1).
5) Remove door sealing cover (2).
Repair Instructions
(a)
4
(b)
1
S7RS0B9606002
2
3
"B"
"A"
"A"
"B"
"A"
I4RS0A960003-01
6
7
4. Latch striker
5. Shim
6. Key cylinder
2
6) Raise window all the way up.
7) Remove door sash (1).
S7RS0B9606001
2
3
I4RS0B960003-01
7. Inside handle bezel
: 5.0 N⋅m
(0.5 kgf-m, 4.0 lb-ft)
: 10 N⋅m
(1.0 kgf-m, 7.5 lb-ft)
1
I4RS0A960004-01
1
I4RS0A960007-01