Ip Address Setting - imagistics DL850 Operating Manual

[3] IP Address Setting

When using the server function, this setting is required to enable a PC to gain access
to this machine.
NOTE:
Ask your network manager to perform this setting. Incorrect setting may
cause a trouble in other network systems.
❒ Setting options: IP address, Subnetmask, Gateway address, Line speed
System Initial Setting Menu Screen
IP Address Setting Screen (next page)
Procedure
1 Touch [1] System initial setting on the Key Operator Mode Screen to display the
System Initial Setting Menu Screen.
2 Touch [3] IP address setting to display the IP Address Setting Screen.
3 Make the required setting.
Touch to highlight the address key on the left, then enter the address number using the
screen keypad. Touch SET to fix the number, or touch RESET to clear.
4 When customizing the line speed, touch Line speed setting to display the Line Speed
Setting Screen. Touch the desired key, then touch OK to restore the IP Address
Setting Screen.
5 Touch OK to complete the setting and return to the System Initial Setting Menu
Screen.
6 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.
7 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
[1] System Initial Setting (continued)
IP Address Setting Screen
Line Speed Setting Screen
Key Operator
Mode
System Initial
Setting
Copier Initial
Setting
User Setting
Mode
E.C.M.
Lock/Delete
Program
Memory
Paper Type/
Special Size
Panel Contrast/
Key Sound
Key Operator
Data Setting
Weekly
Timer
Control Panel
Adjustment
Tray Auto
Select Setting
Energy
Saver Setting
Memory
Switch
Machine
Management
List Print
Call Remote
Center
Side 2 Lens
Adjustment
Finisher
Adjustment
HDD
Management
Non-Image
Area Erase
Timing
Adjustment
Centering
Adjustment
13
13-7
Key Operator
Mode