imagistics DL850 Operating Manual page 240

Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) (continued)
3.
Touch Vertical/Horizontal , then specify the vertical and horizontal
widths of the scanning area.
Use up/down arrow key to enter the width from 10 to 150mm in 1mm increments.
Keep touching the key to increase/decrease the value continuously.
Or, touch ENTER REPEAT WIDTH BY KEYPAD to display the popup menu to enter
the value from the touch screen keypad.
Touch Vert./Horiz. on the popup menu each time to shift it from one to another. Enter
the value, then touch OK to restore the Repeat Mode Selection Screen.
4.
Touch OK .
The Application Selection Screen will be restored.
5.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
6.
Select the desired magnification and copy size.
9-34
DETAILS
• APS and AMS are automatically released, and 1.000 (100%) is selected
as a magnification ratio.
• Copy mode is automatically set to 1a1. When selecting 1a2 mode,
Platen store mode will function automatically.