Making Folded Booklet (Folding / Stapling&Folding); M Aking Folded Booklet (Folding / Stapling&Folding) - imagistics DL850 Operating Manual

Making Folded Booklet (Folding / Stapling&Folding)
The Folding and Stapling & Folding modes are available only when the 9980 Finisher
option is installed. When either mode is selected, the Booklet feature is automatically
selected and indicated on the Application Selection Screen.
The following copy results may be expected when using Folding or Stapling & Folding
mode:
In the Folding mode, each copied set is folded and output to the Booklet tray of the Fin-
isher.
In the Stapling & Folding mode, each copied set is stapled at two positions (saddle
stitched), then folded and output to the Booklet tray of the Finisher.
>>>Specifications for Folding / Stapling & Folding Mode<<<
❒ Max. number of folded sheets (20 lb paper) in both modes:
Folding:
Stapling & Folding: 20 sheets
❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R, A4R (16 ~ 24 lb)
❒ Booklet tray capacity:
When the Booklet tray capacity is exceeded, the Finisher will stop operating.
Select the appropriate print quantity by referring to the following capacities.
Approx. 100 sheets max.
Folding:
Stapling & Folding: 20 sets max. of 5-sheet-folded booklet (20 x 5 = 100 sheets)
❒ Incompatible Conditions with Booklet selected: APS, 1a1, 2a1, Sort, Staple-sort,
Group, Rotation sort, Rotation group, Output to Secondary (sub) tray, Trimming,
Punch, Mixed Original, Full Area in Non STD size, Tab Paper, Sheet/Cover
Insertion, Combination, Transparency Interleave, Program Job, Non-Image Area
Erase, Reverse Image, Repeat
❒ Incompatible conditions without Booklet: Sort, Staple-sort, Group, Rotation Sort,
Rotation Group, Output to Secondary (sub) tray, Trimming, Punch, Transparency
Interleave, Reverse Image
7-8
DETAILS
• When copying two-sided signature originals using the Folding or Sta-
pling & Folding mode, release the automatically selected Booklet mode
on the Application Selection Screen.
• When copying dark originals or using Reverse Image mode together
with Folding or Stapling & Folding mode, the folded line of the output
copies may be slightly shifted.
3 sheets (less than in Stapling & Folding mode because they
are not clinched first)
19 sheets when using thick cover paper
33 sets max. of 3-sheet-folded booklet (33 x 3 = 99 sheets)
5 sets max. of 20-sheet-folded booklet (5 x 20 = 100 sheets)