How To Access The Ecm Setting Mode - imagistics DL850 Operating Manual

[4] E.C.M. (Electronic Copy Monitor) Function Setting (continued)

How to Access the ECM Setting Mode

Key Operator Mode Screen
Procedure
1 Touch [4] E.C.M. function setting on the Key Operator Mode Screen. The ECM
Master Key Code Screen displays, if a code is required.
2 Use the keypad on the touch screen to enter your 8-digit ECM master key code, then
touch OK to display the ECM Setting Menu Screen. (See note.)
3 Select the desired ECM function, and make settings, as required.
To exit the ECM mode, touch PREVIOUS SCREEN on the ECM Setting Menu Screen.
4 To exit the Key Operator mode, touch PREVIOUS SCREEN on the Key Operator Mode
Screen to restore the Basic Screen.
13-16
NOTE:
If an invalid ECM master key code is entered, continue by entering the
valid 8-digit code. The ECM master key code can be set to less than 8
digits by the Memory switch setting of the Key Operator function.
ECM Master Key Code Screen
ECM Setting Menu Screen