imagistics DL850 Operating Manual page 319

Inserting a New Staple Cartridge into 9982/9980 Finisher (continued)
3.
Pull up the cartridge housing, then remove it while sliding it along
the stapler rail.
4.
9982: Open the bottom of the cartridge housing, then remove the
empty cartridge.
Open the bottom of the cartridge housing while pressing two locks on both sides.
Do not remove the staples remaining inside the housing; otherwise, the
first sheet output after the replenishment will not be stapled.
1
2
Reminder!
9982
9980
1
2
9980
Adding Toner
Inserting New
Staple Cartridge
Empty Trash
Scanning
Checking
Copy Count
12
Maintenance
12-7
Basket
Cleaning
Section
& Supplies