imagistics DL850 Operating Manual page 372

[13] Memory Switch Setting (continued)
[11] EDH APS
The copier automatically selects the same size copy paper as the original placed on
the EDH. (In reduction/enlargement mode, an appropriate paper size is selected
according to the ratio.)
[12] Platen AMS
The copier detects the size of the platen original and selects the appropriate
magnification ratio to correspond to the selected paper size.
[13] EDH AMS
After detecting the original size placed on the EDH the copier automatically selects an
appropriate ratio for the copy when copy size is selected manually.
[14] Select tray when APS cancel
Select the tray to be automatically selected when APS is released.
[15] Platen original size detect
Select the series of the original paper size detected from the platen glass.
[16] EDH original size detect
Select the series of the original paper size detected from the EDH.
[17] Platen orig. size detect (SMALL)
Select the minimum original paper size detected from the platen glass.
[18] Rotation
Select to activate, activate the Rotation only when the APS/AMS functions, or activate
the Rotation only when the APS/AMS/reduce functions.
[19] Staple mode reset-function
Staple mode is automatically canceled after a job is completed with Staple sort mode
ON. (Sort mode is selected.)
[20] Job offset operating
Set the copier to offset the copies of different jobs when outputting multiple reserve
jobs in succession.
[21] Continuation print
Set the copier to output multiple reserve jobs in succession.
[22] SDF Auto start
Select to feed the SDF original automatically when placed on the EDH, press [ Start ]
to feed the SDF original.
13-42