Copying Using Memory; C Opying Using Memory; To Scan Originals Into Memory (Store Mode) - imagistics DL850 Operating Manual

Copying Using Memory

This section describes various copying features available on this machine using built-
in memory.

To Scan Originals into Memory (Store Mode)

Store mode allows you to scan all the originals first, then to start a continuous printing
job.
Use EDH store mode to scan a large amount of originals.
Use Platen store mode for originals that cannot be fed through the EDH due to
thickness, size or condition.
>>>Specification for Store Mode<<<
❒ Incompatible with EDH store mode: Image Insert, Book Copy, Storing image in
Overlay Memory
❒ Incompatible with Platen store mode: Storing image in Overlay Memory
1.
Make copying selections, as desired.
2.
Touch STORE on the Basic Screen to highlight it.
3.
Enter the desired print quantity from the control panel keypad.
3-34
DETAILS
EDH tray capacity is 100; however, more than 100 originals can be scanned
into memory using EDH store mode.
Reminder!
When starting a new copying job, be sure to close the EDH securely, then
press [ Panel Reset ].
HINT
See p. 3-7 for details on setting print quantity.