Table of Contents
Advertisement
Setting Up Network Printing
3.2
Setting the IP Address for This Machine
Use this machine's control panel to assign an IP address to this machine.
Reminder
When specifying network settings, follow the instructions of the network
administrator.
Setting the IP Address
1
Press the [Utility/Counter] key on this machine's control panel, touch
[Administrator Setting], and then enter the administrator password.
–
The administrator password is required in order to enter Adminis-
trator mode. Ask the administrator of this machine for the adminis-
trator password.
2
Touch [Network Setting], then [TCP/IP Setting].
3
Specify settings for the following:
IP Address: Set the IP address of this machine.
Subnet Mask: Set the subnet mask for the network to which you are
connecting.
Default Gateway: Set the default gateway address for the network to
which you are connecting.
4
To apply the settings, restart this machine (turn it off, then on again).
–
When turning the main power switch OFF then ON, wait for 10 sec-
onds or longer before turning it ON again; otherwise the copier may
not function normally.
Turn this machine back on to apply the IP address.
25C-1
3
3-5
Advertisement
Table of Contents
