Programmed Shut-Off (Weekly Timer); P Rogrammed Shut-Off (Weekly Timer) - imagistics DL850 Operating Manual

Programmed Shut-Off (Weekly Timer)

The Weekly Timer function turns a copier on and off at the time specified by the Key
Operator.
This function is not factory-set. When a copier is under control of the Weekly Timer
function, the Timer indicator on the right side of the control panel is lit.
When the Timer indicator light is on and other indicators are off, copying is unavailable
due to the Weekly Timer function.
However, copying can be available by using the following procedure.
1.
Press [ Energy Saver ] on the control panel.
The Basic screen will be displayed along with the message shown below.
Timer interrupt mode
Enter password
7-2
Stop
Reminder!
IMPORTANT: WHEN THE TIMER INDICATOR IS LIT, THE COPIER WILL TURN
OFF AUTOMATICALLY. DO NOT TURN IT OFF BY PRESSING POWER SWITCH.
Stop
HINT
For details of the Weekly Timer function, see p. 13-27 to p. 13-35.
DETAILS
The machine power will be turned off automatically after 5 minutes from
this state if a password is not entered.
Print Copy Scan
Energy Saver
Timer
Interrupt
Panel Reset
Print Copy Scan
Energy Saver
Timer
Interrupt
Panel Reset