imagistics DL850 Operating Manual page 123

Checking Feature Selections and Proof Copying (continued)
5.
To release the settings:
Touch the desired copying condition key on the Check Screen to highlight it, then
touch RELEASE SETTING .
The confirmation screen will appear on the Check Screen.
Touch YES to cancel the function, or NO to restore.
• If making a sample copy, proceed to the next step.
• To start printing, proceed to step 8 .
6.
Press [ Proof Copy ] on the control panel or touch PROOF COPY on
the Check Screen.
A sample copy will be output.
• Press [ Stop ] to suspend the proof copying. In this case, the scanned
image data will not be deleted from memory.
• You cannot change or release selections that appeared dimmed after
proof copying.
• When the copy result is satisfactory, proceed to the next step.
• When any setting change is required, return to step 4 , then repeat proof copying,
as required.
If the desired selection cannot be changed, press [ Stop ] to delete all the data in
memory, then press [ Panel Reset ] to restart the job setting.
DETAILS
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Finisher
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-55