imagistics DL850 Operating Manual page 72

Positioning originals in Z-Folded original mode
Z-Folded original mode detects the folded original size without using the size
detection sensor of the EDH.
1.
Arrange originals in order.
2.
Position original(s) FACE UP in the EDH tray.
Place two-sided originals with page one FACE UP.
Up to 100 originals can be set at a time.
3.
Adjust paper guides.
3-4
HINT
To use the Z-Folded original mode, see procedure on p. 8-8 to p. 8-9.
Reminder!
• Before placing originals in the tray, be sure the EDH is closed fully. Once
closed, do not open the EDH, otherwise the selected copy conditions
may be altered automatically.
• Be sure not to use unsuitable EDH originals. See p. 11-8 for details.
Positioning Originals (continued)