Lunch Hour Off Setting - imagistics DL850 Operating Manual

[4] Lunch Hour Off Setting

The Weekly Timer function turns the copier ON and OFF once a day. Use this Lunch
hour off function to shut down power for lunch break then turn on again while the
copier is turned on due to the Weekly Timer function. The only one off time interval
can be programmed.
Weekly Timer Setting Menu Screen
Procedure
1 Touch [9] Weekly timer on the Key Operator Mode Screen. Enter your 4-digit Weekly
Timer master key code, then touch OK to display the Weekly Timer Setting Menu
Screen.
2 Touch [4] Lunch hour off setting to display the Lunch Hour Off Setting Screen.
3 Touch Function Valid to activate the Lunch hour off function.
Set OFF-time and Restart-time using the touch screen keypad, and then touch SET
after each entry.
4 Touch Function Invalid to de-activate the Lunch hour off function. The time setting
area will appear grayed out and cannot be selected.
The Function Invalid setting is the factory default setting.
5 Touch OK to complete the setting and return to the Weekly Timer Setting Menu
Screen.
6 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.
7 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
13-34
NOTE:
If an invalid Weekly Timer master key code is entered, continue by entering
the valid 4-digit code.
[9] Weekly Timer (continued)
Lunch Hour Off Setting Screen