User Density Level 2 Setting; Key Sound - imagistics DL850 Operating Manual

[2] User Density Level 2 Setting

Output copying samples from 16 density levels from Lighter to Normal or Normal to
Darker, then select the desired exposure and program it as USER2.
The programmed copy density can be recalled by selecting USER2 on the Basic
Screen.
User Setting Mode Menu Screen
Procedure
1 Touch [3] User setting mode on the Key Operator Mode Screen to display the User
Setting Mode Menu Screen.
2 Touch [2] User density level 2 setting to display the User Density Level 2 Setting
Screen.
3 Place the original on the platen glass.
4 Touch Darker or Lighter to select the density level to be programmed.
5 Touch No.1 1~4 , No.2 5~8 , No.3 9~12 , No.4 13~16 , or Set density ## , then press
[ Start ]. The density level sample sheet will be output.
6 Select the desired exposure from the sample sheet(s), then enter the density level No.
by using the touch screen keypad.
7 Touch OK to complete the setting and return to the User Setting Mode Menu Screen.
8 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.
9 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
[3] User Setting Mode (continued)
User Density Level 2 Setting Screen
Key Operator
Mode
System Initial
Setting
Copier Initial
Setting
User Setting
Mode
E.C.M.
Lock/Delete
Program
Memory
Paper Type/
Special Size
Panel Contrast/

Key Sound

Key Operator
Data Setting
Weekly
Timer
Control Panel
Adjustment
Tray Auto
Select Setting
Energy
Saver Setting
Memory
Switch
Machine
Management
List Print
Call Remote
Center
Side 2 Lens
Adjustment
Finisher
Adjustment
HDD
Management
Non-Image
Area Erase
Timing
Adjustment
Centering
Adjustment
13
13-13
Key Operator
Mode