imagistics DL850 Operating Manual page 173

Punching File Holes in Copies (Punch) (continued)
7.
Specify the original set direction.
Touch SPECIAL ORIGINAL on the Basic Screen to display the Special Original
popup menu.
Touch to select the desired original set direction, then touch OK to return to the Basic
Screen.
8.
Select additional copying features, as required.
9.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
10.
Position originals in the EDH.
See p. 3-2 to p. 3-5 for details on positioning originals.
11.
Press [ Start ].
When the finisher exit tray capacity is exceeded due to the
print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
HINT
HINT
CAUTION
Weekly
Timer
Rotation
Vertical/Hori-
zontal Zoom
Folding /
Stapling&Folding
Punch
Z-Folding
Trimming
Cover Sheet
Feeding
Using Finisher
Manually
Tandem Mode
7
A dvanced
Information
7-13