Vertical/Horizontal Zoom Mode; Using Finisher Manually - imagistics DL850 Operating Manual

Vertical/Horizontal Zoom Mode

Use the Vertical/Horizontal zoom mode to reduce or enlarge vertical and horizontal
dimensions, independently.
>>>Vertical/Horizontal Zoom Mode Specifications<<<
❒ Vertical/Horizontal zoom range: 0.250~4.000
❒ Incompatible Conditions: APS, AMS, Reduce & Shift in Image Shift, Overlay with
Repeat
The figure shown below is the sample image using the Vertical/Horizontal zoom.
Length: 0.50, Width: 0.50
Length: 1.00, Width: 0.50
Length: 2.00, Width: 0.50
Length: 4.00, Width: 0.50
1.
Touch ZOOM on the Basic Screen.
The popup menu for setting a zoom ratio will be displayed.
When starting a new copying job, be sure to close the EDH securely, then
press [ Panel Reset ].
Length: 0.50, Width: 1.00
Width
Length: 1.00, Width: 1.00
Length: 2.00, Width: 1.00
Length: 4.00, Width: 1.00
Reminder!
Length: 0.50, Width: 2.00 Length: 0.50, Width: 4.00
Length: 1.00, Width: 2.00 Length: 1.00, Width: 4.00
Length: 2.00, Width: 2.00 Length: 2.00, Width: 4.00
Length: 4.00, Width: 2.00 Length: 4.00, Width: 4.00
Weekly
Timer
Rotation
Vertical/Hori-
zontal Zoom
Folding /
Stapling&Folding
Punch
Z-Folding
Trimming
Cover Sheet
Feeding
Using Finisher
Manually
Tandem Mode
7
A dvanced
Information
7-5