Electronic Copy Monitor) Function Setting; Key Operator; Data Setting - imagistics DL850 Operating Manual

[4] E.C.M. (Electronic Copy Monitor) Function Setting
This function can only be accessed by the Key Operator after a 8-digit ECM master
key code is entered. The Electronic Copy Monitor allows you to monitor all copying
activity by controlling ECM password accounts.
This feature can track copier usage for individual users and/or accounts as well as
limit access to the copier to authorized users. Copy quantity limits for specific
accounts can also be set. Use the ECM Key Operator Form provided at the end of this
section to record ECM password information.
The ECM stores up to 1,000 ECM passwords, each of which represents a separate
account that can be used for billing and recordkeeping. The number of users assigned
to each account may depend upon the billing system in operation and the number of
individuals and departments using the copier. When the ECM is activated, copying
can be performed only after a valid ECM password is entered.
Copy quantity and copy limit for each account can be visually confirmed on the
screen.
If ECM needs to be activated on your machine, contact your service representative.
The following ECM settings can be made:
[1] E.C.M. data edit:
Change, add, or delete ECM data, and reset the copy count of the individual account.
[2] E.C.M. all count reset:
Clear the copy count for all accounts.
[3] E.C.M. function setting:
Select the ECM function to be on or off, and also set the machine condition when the
copy limit is reached to stop immediately or after a job is completed, or to only display
a warning message.

Key Operator

Mode
System Initial
Setting
Copier Initial
Setting
User Setting
Mode
E.C.M.
Lock/Delete
Program
Memory
Paper Type/
Special Size
Panel Contrast/
Key Sound
Key Operator

Data Setting

Weekly
Timer
Control Panel
Adjustment
Tray Auto
Select Setting
Energy
Saver Setting
Memory
Switch
Machine
Management
List Print
Call Remote
Center
Side 2 Lens
Adjustment
Finisher
Adjustment
HDD
Management
Non-Image
Area Erase
Timing
Adjustment
Centering
Adjustment
13
13-15
Key Operator
Mode