Copying onto Transparent Films (Transparency Interleave) (continued)
4.
Touch Transparency Interleave on the Application Selection Screen.
5.
Select the desired Transparency Interleave mode, then touch OK .
6.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
7.
Position original(s) FACE UP in the EDH or FACE DOWN on the
platen glass.
8.
Press [ Start ].
9-18
DETAILS
• AMS is selected automatically.
To release AMS, select the desired magnification.
• Print quantity is already set to 1. You cannot enter any other quantity.
HINTS
For details on positioning originals, see p. 3-2 to p. 3-6.