Sdf - imagistics DL850 Operating Manual

5.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
6.
Position SDF original FACE UP in the EDH.
In Normal SDF mode:
Position a sheet of the original in the EDH.
Never set more than one thick original or
paste up, otherwise machine trouble may be
caused.
Auto Start mode with EDH store mode:
Adjust the paper guides according to the original size to be set, then position a sheet
of original in the EDH.
The set original will be automatically fed and scanned.
Never set more than one original, otherwise machine trouble may be caused.
When scanning is completed, touch STORE to exit the EDH store mode.
7.
Press [ Start ].
In normal SDF mode, the original will be fed and scanned, then the printing job will
start in succession when the machine becomes ready for output.
In Auto Start mode with EDH store mode, the printing job will start immediately.
When the finisher / trimming unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.
Feeding Single Original from EDH (SDF) (continued)
HINT
CAUTION
Original
Direction
Text/Photo
Enhance
Mixed
Original
Z-Folded
Original

SDF

Original
Form
8
Special
Original
8-11