imagistics DL850 Operating Manual page 268

Overlaying an Image onto Each Page Copied in the Job (Overlay) (continued)
3.
Touch OVERLAY .
4.
Touch OK on the Stamp/Overlay Selection Screen.
The Application Selection Screen will be restored.
5.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
The Store mode is automatically selected.
6.
Select the desired paper size and magnification on the Basic Screen.
APS and AMS are automatically released, and 1.000 (100%) is selected as a
magnification ratio.
7.
Enter the desired print quantity from the control panel keypad.
8.
Position the overlaying original.
Position the original FACE UP in the EDH or FACE DOWN on the platen glass.
9.
Press [ Start ] to scan.
The original image will be scanned into memory.
10.
Position the original(s) to be overlaid.
Position the original FACE UP in the EDH or FACE DOWN on the platen glass.
11.
Press [ Start ] to scan.
12.
Repeat steps 10 and 11 for all originals.
9-62
HINT
See p. 3-7 for details on setting print quantity.
HINT
For details on positioning originals, see p. 3-2 to p. 3-6.