imagistics DL850 Operating Manual page 238

Reversing Color in Black and White Image (Reverse Image) (continued)
4.
Enter the desired print quantity from the control panel keypad.
5.
Position original(s) FACE UP in the EDH or FACE DOWN on the
platen glass.
6.
Press [ Start ].
9-32
HINT
See p. 3-7 for details on setting print quantity.
HINT
For details on positioning originals, see p. 3-2 to p. 3-6.
CAUTION
When the finisher / paper exit tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they
exit; otherwise, mishandled paper will occur.