imagistics DL850 Operating Manual page 124

Checking Feature Selections and Proof Copying (continued)
7.
Change the print quantity, as required.
8.
Press [ Start ].
If the print quantity is not changed, the copier will output the rest, except the sample
sets.
3-56
DETAILS
Proof copy can be performed as needed, until the print quantity amount on
the Basic Screen reaches zero. (Note that the print quantity amount on the
Check Screen does not change.)
If required, change the print quantity on the Basic Screen.
CAUTION
When the finisher / trimming unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.