User Lens Mode Ratio Setting - imagistics DL850 Operating Manual

[3] User Lens Mode Ratio Setting

The preset and userset ratios are used to reduce and enlarge the original image to
accommodate copy paper size, and are available on the Basic Screen.
❒ Setting options:Userset or Preset ratio
❒ Default setting: USERSET1: 4.000
USERSET2: 2.000
USERSET3: 0.500
User Setting Mode Menu Screen
Procedure
1 Touch [3] User setting mode on the Key Operator Mode Screen to display the User
Setting Mode Menu Screen.
2 Touch [3] User lens mode ratio setting to display the User Lens Mode Ratio Setting
Screen.
3 Touch the USERSET you want to change, then enter a ratio from 0.250~4.000, using
the keypad.
If a ratio under 0.250 is entered, 0.250 will be displayed.
If a ratio over 4.000 is entered, 4.000 will be displayed.
4 Touch OK to complete the setting and return to the User Setting Mode Menu Screen.
5 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.
6 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
13-14
NOTE:
Normally, users are allowed to change the three USERSETs in the bottom
line on the User Lens Mode Ratio Setting Screen. The preset keys in the
top and middle lines can also be programmed in 2-5 DIPSW mode;
however, changing them is not recommended.
[3] User Setting Mode (continued)
User Lens Mode Ratio Setting Screen