Copying Non-Standard Size Originals (Original Form); C Opying Non-Standard Size Originals (Original Form) - imagistics DL850 Operating Manual

Copying Non-Standard Size Originals (Original Form)

The copier usually detects the standard size of originals fed through EDH or
positioned on the platen glass (STD size mode).
Use Non STD size mode to specify the scanning area manually for copying or printing
special size originals. Use Tab paper mode to copy a tabbed original, including the
image of the tab part, onto tabbed copy paper.
>>>Specifications for Original Form<<<
❒ Tab extension width: 12.5 mm or less
❒ Incompatible with Non STD Size: Mixed Original, Z-Folded Original, Tab Paper,
Storing image in Overlay Memory
❒ Incompatible with WHOLE AREA: Combination, Booklet, Book Copy, Non-Image
Area Erase, Image Shift
❒ Incompatible with Tab Paper: Mixed Original, Z-Folded Original, Non STD Size,
Sheet/Cover Insertion, Chapter, Combination, Booklet, Transparency Interleave,
Image Insert, Book Copy, Storing image in Overlay Memory
1.
Touch SPECIAL ORIGINAL on the Basic Screen.
The Special Original popup menu will be displayed.
2.
Touch Non STD Size or Tab paper .
The popup menu will appear for Non STD size or Tab paper size setting.
8-12
Reminder!
When starting a new copying job, be sure to close the EDH securely, then
press [ Panel Reset ].