imagistics DL850 Operating Manual page 170

Making Folded Booklet (Folding / Stapling&Folding) (continued)
When selecting STAPLING & FOLDING , the machine with the trimmer unit installed
selects TRIM automatically. To cancel the trimming mode, touch TRIM to deselect it.
4.
Touch OK on the Output Mode popup menu.
The Basic Screen will be restored and the selection made in the output mode will be
reflected in the OUTPUT icon area.
5.
Select additional copying features, as required.
6.
Enter the desired print quantity from the control panel keypad.
7.
Position original(s).
8.
Press [ Start ].
7-10
DETAILS
NO COVER SHEET of the Booklet is initially selected.
To change this selection, touch APPLI. on the Basic Screen to display the
Application Selection Screen, then touch Booklet twice to display the
Booklet Mode Selection Screen to make another selection or to release
the setting.
HINT
See p. 3-7 for details on setting print quantity.
HINT
See p. 3-2 to p. 3-6 for details on positioning originals.
DETAILS
When loading originals, heed the following limits on capacity:
Folding mode:
12 pages or less for simplex copying
6 pages or less for duplex copying
Stapling & Folding mode:
80 pages or less for simplex copying
40 pages or less for duplex copying
Exceeding the above capacity limits may cause trouble in the Finisher.
CAUTION
When the Booklet tray capacity is exceeded, the Finisher will
cease operating. To avoid this, select the appropriate print
quantity from the specifications shown on p. 7-8.