Timer Interrupt Password Setting - imagistics DL850 Operating Manual

[5] Timer Interrupt Password Setting

Use this password setting mode to establish a 4-digit password requirement for using
Timer Interrupt function. The default password of 0000 allows the timer function to be
interrupted without the requirement for password entry.
Weekly Timer Setting Menu Screen
Procedure
1 Touch [9] Weekly timer on the Key Operator Mode Screen. Enter your 4-digit Weekly
Timer master key code, then touch OK to display the Weekly Timer Setting Menu
Screen.
NOTE:
If an invalid Weekly Timer master key code is entered, continue by entering
the valid 4-digit code.
2 Touch [5] Timer interrupt password set to display the Timer Interrupt Password
Setting Screen.
3 Use the touch screen keypad to enter a 4-digit password, and then touch OK to
complete the setting and return to the Weekly Timer Setting Menu Screen.
NOTE:
When the password setting is 0000, timer interrupt can be used simply by
turning the copier OFF, then ON. In this case, you will be asked to enter the
duration of use (a period of time to turn the copier power on).
4 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.
5 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
[9] Weekly Timer (continued)
Timer Interrupt Password Setting Screen
Key Operator
Mode
System Initial
Setting
Copier Initial
Setting
User Setting
Mode
E.C.M.
Lock/Delete
Program
Memory
Paper Type/
Special Size
Panel Contrast/
Key Sound
Key Operator
Data Setting
Weekly
Timer
Control Panel
Adjustment
Tray Auto
Select Setting
Energy
Saver Setting
Memory
Switch
Machine
Management
List Print
Call Remote
Center
Side 2 Lens
Adjustment
Finisher
Adjustment
HDD
Management
Non-Image
Area Erase
Timing
Adjustment
Centering
Adjustment
13
13-35
Key Operator
Mode