Reverse Image - imagistics DL850 Operating Manual

Programming Different Settings for an Output Job (Program Job) (continued)
2.
Touch Program Job on the Application Selection Screen.
The incompatible function keys will be dimmed to show inactivity.
3.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
The STORE key on the Basic Screen appears highlighted to show that the Store
mode is automatically selected.
4.
Select the desired copy conditions.
5.
Position originals FACE UP in the EDH or FACE DOWN on the platen
glass.
If the number of EDH originals exceeds 100, divide them into blocks not exceeding
100 sheets and load them from the block with the first page.
6.
Press [ Start ].
The copy size determined at this time will be applied to all subsequent JOBs.
When scanning for the current JOB is completed, the popup menu will be displayed in
the Basic Screen.
7.
Touch CONFIRM .
The current JOB images will be stored.
To delete the images, touch CANCEL .
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
Transparency
Interleave
Image Insert
Book Copy
Program Job
Non-Image
Area Erase
Reverse
Image
Repeat
9
Applications
Frame/Fold
Erasure
AUTO
Layout
All-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
9-27
Overlay
Memory