imagistics DL850 Operating Manual page 105

4.
Position original(s) after completing the scan for the current job.
See p. 3-2 to p. 3-6 for details on positioning originals.
5.
Press [ Start ] to start scanning for the reserve job.
When setting more than one reserve job, the next reserve job setting will
be available after the copier starts to scan for the previous reserve job.
When setting the fourth copying job, touch the active FREE JOB key at the far right to
scroll to the next reserve setting screen. Another three reserve job settings (04-06)
will be available.
When setting the seventh copying job, touch the active FREE JOB key at the far right
to scroll to the next reserve setting screen. Another four reserve job settings (07-10)
will be available.
Copying Using Memory (continued)
HINT
DETAILS
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Finisher
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-37