imagistics DL850 Operating Manual page 299

Operating Image Data Stored in HDD (HDD Job Information) (continued)
Check the sample copy, change the copy conditions if required, then press [ Start ] on
the control panel of the machine to output the rest except the sample set.
The "Result of job print" dialogue box will appear when print job is completed.
Selecting Wait output:
Enter the desired print quantity, then click on [ Apply ].
The image data will be recalled but held to be output, then the Basic Screen will be
displayed on the touch screen of the machine.
Select the desired copy conditions and enter the desired print quantity, then press
[ Start ] on the machine control panel.
Choosing [ Back ] will resume the Job list dialogue box.
When selecting Auto output or Proof output, only the web browser setting
allows the print quantity to be specified.
When selecting Wait output, the print quantity entered in the web browser
can be changed on the machine control panel before pressing [ Start ].
7.
Delete the image data.
Click on [ Delete ] on the right side of the desired job name to delete the image data.
The Job Delete dialogue box will be displayed.
Click on [ Yes ] to delete the data.
Choosing [ Back ] will resume the Job list dialogue box.
• If any other PC installed with the same setup application is found over
the network, the image data stored in HDD of the PC can also be
deleted.
• Once deleted, the job cannot be restored.
DETAILS
DETAILS
Server
Functions
Image
Store/Delete
Image
Store&Output
Image Recall
To Use Web
Utilities
Machine
Information
Job Status
HDD Job
Information
Environment
Setup
10
Network
Function
10-25