imagistics DL850 Operating Manual page 373

[23] Key click sound
Activate or deactivate the sound each time a key is pressed on the touch panel.
[24] 1 SHOT indication time
Select the SHOT indication time function.
[25] Energy saver screen
Select the screen to display when pressing the [ Energy Saver ] key.
[26] Start key latch function
Activate or deactivate the latch function.
[27] Stop key function
Select to display or not to display the confirmation message when [ Stop ] key is
pressed.
[28] Auto select of Booklet copy
Set the copier with 9980 Finisher mounted to automatically select the Booklet mode
when Stapling&Folding or Folding output mode is selected.
[29] E.C.M. password
Select the acceptable number of digits for the ECM master key code.
[30] Arrow key change (Image Shift)
Select the 1 step unit of the touch key to specify the shift amount in Image shift.
[31] Exit direction of 1 sheet
Select to exit face up or face down when making only 1 sheet of copy.
[32] An interruption suspended way
Select the timing to stop the job in progress when [ Interrupt ] is pressed.
[33] E.C.M. password input timing
Set the input timing for the ECM password.
[34] Key click sound (No paper/JAM)
Select the duration of the buzzer for alerting that the machine has stopped being out
of paper or due to paper misfeed.
[35] Reserve copy function
Set the selection for the reserve job setting.
[36] Scan stop by a pull out tray
Select to stop or continue the scanning job when a tray is pulled out.
[13] Memory Switch Setting (continued)
Key Operator
Mode
System Initial
Setting
Copier Initial
Setting
User Setting
Mode
E.C.M.
Lock/Delete
Program
Memory
Paper Type/
Special Size
Panel Contrast/
Key Sound
Key Operator
Data Setting
Weekly
Timer
Control Panel
Adjustment
Tray Auto
Select Setting
Energy
Saver Setting
Memory
Switch
Machine
Management
List Print
Call Remote
Center
Side 2 Lens
Adjustment
Finisher
Adjustment
HDD
Management
Non-Image
Area Erase
Timing
Adjustment
Centering
Adjustment
13
13-43
Key Operator
Mode