Using Platen Glass - imagistics DL850 Operating Manual

Making Double-Sided Copies (1a a a a 2, 2a a a a 2) (continued)

Using Platen Glass

Use the platen glass to scan originals unsuitable for the EDH.
>>>Specification for Double-Sided Copying Using Platen Glass<<<
❒ Use the Platen store mode.
❒ See p. 11-8 for the information on unsuitable EDH originals.
❒ Incompatible Conditions: Face up exit using Secondary (sub) tray, Image Insert,
Transparency Interleave
1.
Select the original set direction.
Touch SPECIAL ORIGINAL on the Basic Screen to display the Special Original
popup menu, then touch the desired original direction key to highlight it.
Touch OK to return to the Basic Screen.
2.
Select the binding mode.
Touch OUTPUT APPLI. on the Basic Screen to display the Output Mode popup
menu, then touch the desired binding mode key to highlight it.
Output Mode popup menu with Finisher
Output Mode popup menu without Finisher
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Finisher
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-25