To Copy In Zoom Mode - imagistics DL850 Operating Manual

Selecting Magnification Ratio (Lens Mode) (continued)

To Copy in Zoom Mode

Use the Zoom mode to reduce or enlarge the copied original image in 0.1%
increments.
>>> Specification for Zoom Mode <<<
Zoom range: 0.250 ~ 4.000
Incompatible Conditions: AMS, Repeat mode in Repeat, Reduce & Shift in Image
Shift
1.
Touch ZOOM on the Basic Screen.
The popup menu for setting a zoom ratio will be displayed.
When starting a new copying job, be sure to close the EDH securely, then
press [ Panel Reset ].
2.
Touch Verti./Horiz. on the popup menu, if not highlighted, then set
the desired zoom ratio.
Use the keypad on the popup menu to enter the desired magnification ratio
in 3 digits, or use arrows (
If an incorrect ratio is entered, continue by entering the correct 3-digit ratio.
3.
Touch OK .
The popup menu disappears automatically and the specified zoom ratio will be
displayed on the Basic Screen.
4.
Select additional copy conditions, as desired.
5.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
Reminder!
DETAILS
c
HINT
d
/ ) to scroll to the desired ratio.
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Finisher
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-17