Output Mode For Machine Without Finisher; O Utput Mode For Machine Without Finisher - imagistics DL850 Operating Manual

Output Mode for Machine without Finisher

This section describes the output modes for a copier without the Finisher.
The Non-sort mode is initially selected.
1 Non-sort mode copies the original set in amounts determined by the print quantity
setting, then outputs sorted sets normally.
2 Rotation sort mode rotates every other sorted sets by 90° upon exit, provided the same
paper size is loaded in two trays, one tray with paper loaded in crosswise orientation
and the other tray with paper loaded in lengthwise orientation, e.g., 8.5"x11" and
8.5"x11"R.
3 Group mode copies each original page in amounts determined by the print quantity
setting, then outputs grouped sets normally.
4 Rotation group mode rotates every other grouped set by 90° upon exit, provided the same
paper size is loaded in two trays, one tray with paper loaded in crosswise orientation and
the other tray with paper loaded in lengthwise orientation, e.g., 8.5"x11" and 8.5"x11"R.
Using Face Up mode in combination with the above four modes, simplex copies and
odd numbered duplex copies exit face up on the exit tray.
Face down
non-sort (default)
Face up
non-sort
3-42
Originals
3
2
1
Face down Face down
rotation sort group
Face up Face up
rotation sort group
Example:
3-set copies
Face down
rotation group
Face up
rotation group