imagistics DL850 Operating Manual page 287

Storing Image Data While Copying (Image Store&Output) (continued)
9.
Press [ Start ] to scan and then print.
When the Store mode is used, touch STORE on the Basic Screen to deselect the
Store mode when the store function is completed, i.e., after all originals are scanned,
then press [ Start ] to print.
To suspend the scanning or printing job, press [ Stop ] on the control panel.
The popup menu will be displayed to ask you how to complete the current
job. Touch CONTINUE to continue the job, EXIT to cancel the job and
delete the data, or EXIT after storing data to HDD to store the data in
HDD without printing.
After scanning all the originals, the machine automatically starts to print and store the
data in HDD.
When storing job is almost completed, SCANNER→ HDD icon appears in the
message area. Press [ Panel Reset ] to restore the initial settings.
If the Memory Switch No. 43 is turned on in the Key Operator setting, the
Image Data Storing Screen will be displayed while the image data is stored
in HDD. (See p. 13-39 to p. 13-44 for details.)
In this case, touch CANCEL on the Image Data Storing Screen to suspend
the storing job, then touch YES on the popup menu to delete the data, or
touch NO to continue.
DETAILS
DETAILS
Server
Functions
Image
Store/Delete
Image
Store&Output
Image Recall
To Use Web
Utilities
Machine
Information
Job Status
HDD Job
Information
Environment
Setup
10
Network
Function
10-13