Density Shift - imagistics DL850 Operating Manual

Density Shift

Use this function to shift each of nine density levels to three levels lighter or three
levels darker.
This function can be set to use in combination with AUTO (Text/Photo), Text, Photo
and Increase Contrast modes and the general mode.
1.
Touch SPECIAL ORIGINAL on the Basic Screen.
The Special Original popup menu will be displayed.
2.
Select the desired mode.
(eg.) To set the Text mode, touch Text to highlight it.
3.
Press [ Utility ].
The following message will be displayed.
Density Shift (Text)
2 (0 ~ 5)
4.
Press any key (from 0 to 5) using the keypad to determine the
Density shift.
Entering 6 or above will be ignored.
5.
Touch OK on the Special Original popup menu.
Density shift in the selected enhance mode is determined.
Selecting Density Level (continued)
Density shift 1
Density shift 2
Density shift 3
Density shift 4
Density shift 5
Density shift 0
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Finisher
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-21